Features
| Warranty length | 2 Years |
|---|---|
| Brand | Audio Technica |
Tech Specs
Turntable
- Type: Belt-drive manual turntable
- Drive: Belt DC servo Motor
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminum
- Wow/ Flutter: <0.15%W RMS (33RPM) @3kHz
- Signal-to-Noise Ratio: >60dB
- Preamp: Phono/Line 4/200mV @1kHz, 5cm/s
- Phono Pre Gain: 35dB nominal, RIAA eq
- Supply: 100-240V AC, 50/60Hz, 0.5A Max
- Power Consumption: 110V 60Hz (1.1W)
- Motor off/Power off: 1W/ 0.1W
- Dimensions (WDH) 420 x 340 x 116.9mm
- Weight: 3.9kg (8.6lbs)
Tonearm
- Type: Static balanced straight carbon
- Effective arm length: 223.6mm
- Overhang: 18.6mm
- Tracking error angle: <2 degrees
- Applicable cartridge weight: 12-17g
- Stylus pressure adjust range: 0-3g
- AC adapter: 12V, 0.5A
- Replacement Styli: AT-VMN95C
Product Description
Audio Technica AT-LPW30TK is a completely manual, belt-drive turntable made to deliver optimal high-fidelity audio performance from vinyl. The dual-speed (33-1/3 and 45 RPM) turntable incorporates an aesthetically appealing anti-resonance MDF plinth with teak-effect veneer to minimise low-frequency audio feedback.
Tonearm
The turntable has a straight aluminum tonearm with adjustable tracking force and employs an AT-HS4 universal ½"-mount headshell with AT-VM95C Dual phono MM cartridge with a smart VM95-styli compatible design that offers a wide range of options to suit every budget and application.
Audio Technica has led the industry in phono cartridge design for over 50 years and this expertise is exhibited in the multi-purpose, high-performance AT-VM95C cartridge with 0.6mil conical stylus which is also compatible with any replacement stylus from the VM95 Series.
Accessories
AT-LPW30TK houses an integrated selectable phono preamp and removable 1m dual RCA output cable to allow direct connection to components with or without a phono input. Other accessories include 45 RPM adapter, rubber mat, removable hinged dust cover and 1.5m AC adapter (AD-SA1205WE).
Key Features
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- AT-HS4 universal ½"-mount headshell and AT-VM95C Dual MM phono cartridge
- AT-VM95C is compatible with other VM95-series replacement styli
- Straight tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance MDF plinth with teak simulated wood veneer base
- Built-in switchable phono pre-amplifier for phono or line-level output
- AC adapter for AC/DC conversion outside chassis reducing signal chain noise
