Features
| Warranty length | 3 Years |
|---|---|
| Colour | Black |
| Brand | Emotiva |
Tech Specs
Audio Specifications
- Power Output (Two Channels Driven)
- 50 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms.
- 90 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms.
Power Output (headphone output; normal mode)
- 8 Ohms: 60 mW / channel
- 33 Ohms: 200 mW / channel
- 47 Ohms: 250 mW / channel
- 150 Ohms: 430 mW / channel
- 300 Ohms: 440 mW / channel
- 600 Ohms: 350 mW / channel
- Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.07 dB).
- Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB.THD + noise: < 0.02% (A-weighted); ref rated power.
- Signal to Noise Ratio (8 Ohm load): > 112 dB; ref rated power; (A-weighted).
- Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
- Damping Factor (8 Ohm load): > 500.
- Input Sensitivity and Gain (for rated power; 8 Ohm load):
- Fixed gain mode: 0.7 V / 29 dB.
- Variable gain mode: 0.5 V / up to 32 dB.
- Input Impedance: 27 kOhms.
Input and Output Connections
- Input Connections: Unbalanced (RCA); one each per channel.
- Speaker Output Connections: Audiophile grade 5-way binding posts.
- Headphone output (front panel): Full-sized ¼” stereo headphone jack.
Trigger
- Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
- Trigger Output: 12 VDC; can drive any load up to 120 mA.
Power Requirements
- 115 - 230 VAC @ 50 / 60 Hz (automatically detected).
Rear Panel Controls
- AC Power switch: slide switch selects between On and Auto-On modes.
- Gain switch: slide switch selects between Variable Gain and Fixed Gain modes.
- Dimensions: 8-1/4” wide x 3” high x 14-1/4” deep (not including connectors).
- Weight: 7.5 lbs (unboxed), 10.5 (boxed)
Product Description
The Emotiva BasX A2m Integrated Amplifier is a small but perfectly formed two channel amplifier that offers a fantastic specification without breaking the bank.
Quality Above All Else
Emotiva has gone back to the drawing board with the A2m, with the premise of making a quality sounding amplifier above everything else and it shows with the low noise, wide bandwidth design that combined with a highly optimised input stage that allows high definition sound to truly shine bright in your setup.
Built To Last
The mantra of built to last resonates with Emotiva and in the A2m, every single part has been tested to meet Emotiva’s exacting standards. A heavy steel chassis is complimented by an aluminium faceplate which will last as well as a double sided circuit board that with plated through holes ensures that sound and signal is optimised.
It’s Flexible Too
The BasX A2m is not just a one trick pony, it has flexibility built in to accommodate various input and output styles too, with an unbalanced RCA handling your inputs that can be controlled and truly dialled into your setup. Output is handled by a 5-way binding post that can handle bare wire, lugs or your banana plug options, making the A2m truly versatile in your home setup.
