Features
| Warranty length | 2 Years |
|---|---|
| Brand | Moerch |
Tech Specs
- Construction: Radial arm with interchangeable arm tubes
- Bearing principle: Dual bearing
Effective mass of complete tonearm with arm tube:
- Light (green): 4g
- Medium (red): 6g
- Heavy (yellow): 8g
- Extra heavy (blue): 14g
- Resonance (depending on arm tube): 8 – 16 Hz
- Tracking force (calibrated scale): 0 – 3 g
- Bias compensation: adjustable while playing
- Azimuth is adjustable for correct channel separation.
- Cueing mechanism: Piston in U-pipe, damped with silicone fluid.
- Distance between pivot and center platter: 212 mm or 294.1 mm
- Diameter of hole for mounting arm base: 20 mm
- Rear overhang from pivot: 70 mm
- Effective length: 230 mm
- Offset angle: 24 degrees.
- Lateral tracking error: 0 degrees at 66mm
- 20.9 mm from center of record.
- Pivot point: In level with the record surface
- Bearing Friction: less than 0.04 mN in all directions
- Balancing: Four (4) different balancing weights
- Internal wiring: 19 strands of ultra pure silver insulated with Teflon
- Capacitance per channel: 28pF for both models
- Tonearm Cord: Balanced. Extremely purified copper strands
heavily silver coated. Halogen free insulation.
- Moerch tonearm connector with Cardas RCA connectors.
- Capacitance per channel: 100pF.
- Terminals: All terminals throughout the arm are gold plated.
Product Description
Moerch DP-8 is a tonearm for your turntable that is built around a complex bearing design to provide accurate tracking. The DP-8 comes in different lengths, weights and finishes to suit your turntable needs.
Horizontal Tracking
Moerch’s DP-8 has a flywheel shaped central body and weights on either side to stabilise the movement of the tonearm when moving horizontally. This improves the accuracy of the tonarm, forcing it to follow the average location of the groove. Which also means all the recorded low-end frequencies are reproduced with full amplitude and dynamics.
Unique Build
The DP-8 has a unique bearing combination. For horizontal mobility, a silicone damped high precision ball-bearing design improves the stability provided by the large housing and counter weights. For vertical motion, two precision sapphire bearings are incorporated, and may be damped if desired, by injecting silicone fluid into a well.
Different Finish, Weight and Length
The DP-8 is available in two different weights, 14g (Extra Heavy) and 7.5g (Medium), and two different lengths, 9” and 12”. This is to optimise the tonearm for any cartridge you may have. It is also available in three finishes, black, chrome or 24-carat gold.
