Features
| Warranty length | 1 Year |
|---|---|
| Brand | TEAC Audio |
Tech Specs
Turntable Section
- Type Belt-drive
- Motor DC Motor
- Rotation Speed:33-1/3rpm, 45rpm
- Wow and flutters: less than 0.1％
- Signal-to-Noise ratio: 67dB (A-weighted,20KHz LPF)
- Platter: Die-cast aluminium, 30cm diameter
Tonearm Section
- Type: Static-balanced, S-shape with knife-edge bearings
- Effective tone-arm length: 223mm
- Anti-skating mechanism: Supported
- Stylus pressure range: 0 to 5g
- Compatible cartridge weight: 3.0g to 12g
- 14g to 23g (incl. head-shell)
Cartridge Section
- Type: VM-series (Moving Magnet-type)
- Output voltage: 4.0mV (1kHz, 5cm/sec.)
- Stylus pressure range: 1.8g to 2.2g (2.0ｇ recommended)
- Cartridge weight: 6.1g
- Head-shell weight: 11g (incl. screws, nuts, and wires)
- Stylus life: approx. 300 hours (depending on conditions)
Analogue Outputs
- Connectors: RCA output x 1 pair (gold-plated)
- Output Voltage: PHONO EQ THRU 4.0mV (1kHz, 5cm/sec.)
- PHONO EQ ON 224mV (-13dBV)
USB Section
- Connector: USB B-type (FULL-SPEED) x 1 (DC 5V 500mA supply required)
- Sampling frequency: 8k / 11.025k / 16 k/ 22.05k / 32k / 44.1k / 48kHz
- Bit depth: 16-bit
General
- Power: AC 100V to 240V, 50/60Hz
- Power consumption: less than 1.5W
- Standby power: less than 0.5W
- GND terminal: Fitted
- Operating temperature range: 5° to 35°
- Overall dimensions; 420 x 117 x 356mm / 16.5” x 4.6” x 14.0” (dust cover closed)
420 x 381 x 402mm / 16.5” x 15.0” x 15.8” (dust cover opened)
- Weight: approx.5.0Kg / 11.0 lbs.
Product Description
Teac TN3B Turntable with built in MM Phono output and USB port delivers is a stylish addition to any hifi system. Incorporating new pivoting knife edge tonearm and belt-drive arrangement designed to minimise any motor cogging effects.
Built in MM Phono EQ-Amplifier
You can connect the TN-3B turntable to any conventional amplifier or hifi system without a phono input. It uses the NJM8080 amplifier which is a high grade, low loss op-amp designed to boost the low-level signals from the phono cartridge up to the line level.
New High-End Pivoting Tonearm
The TN3B turntable features a new tonearm that is the product of a collaboration between Teac and leading tonearm manufacturer SAEC corporation. The new knife-edge, pivo-point bearing tonearm helps deliver a more dynamic sound with outstanding resolution.
S-Shaped Tonearm
The tonearm is S-shaped and uses a universal headshell fitting which means you can pretty much swap to any cartridge and headshell out there. It uses an anti-skating mechanism for precision tracking force adjustment for an accurate reproduction of your records, along with a counterweight for precise stylus-pressure adjustment
USB Port for Digital Archiving
The TN-3B Turntable has a USB port on the rear panel that allows CD quality audio to be delivered to your computer, allowing you to archive or record your analog library in excellent quality. Once the transfer from vinyl to digital is completed, the choice is yours whether that means burning your tracks onto a CD, transferring on to a USB stick or uploading them on a portable device to listen to on the go. Signal transfer is protected from quality loss from oxidation with gold-plated phono/line output terminals.
Key Features
- Pre-installed AT-VM95E cartridge with elliptical-shaped stylus
- External belt-drive with aluminium die-cast platter
- Sleek design with luxurious lacquered finish
- Support for both 33-1/3 and 45 rpm for LP and EP records
- Insulating machined-aluminium feet wit excellent shock absorption
- Honeycombed patterned bottom panel minimises vibrations
