Features
| Warranty length | 2 Years |
|---|---|
| Brand | Dali Speakers |
Tech Specs
- Frequency Range: (+/-3 dB) [Hz] 46 - 26.000
- Maximum SPL [dB]: 108
- Crossover Frequency [Hz]: 2,600
- Crossover Principle: Hybrid Full Active 24 bit DSP and - Passive all analogue
- High frequency driver, Quantity: 1 x 29 mm
- High frequency driver, Diaphragm type: Soft Textile Dome
- Low frequency driver, Quantity: 1 x 6½"
- Low frequency driver, Diaphragm type: Wood Fibre Cone
- Enclosure type: Bass Reflex
- Bass Reflex Tuning Frequency [Hz]: 51.0
- Max. Amplifier Power Output [RMS watt]: 250
- Amplifier Type: Discrete Class D (Closed Loop, Self Oscillating)
- Onboard DAC: Burr Brown PCM1796 (Balanced output)
- Connection Input: ADC-in (RCA)
- Wireless Input(s): Full 24 Bit / 96 kHz (No bit-loss attenuated)
- Max. Digital Resolution [bits/KHz]: 24 / 96
- Magnetic Shielding
- Recommended Placement: Shelf or stand
- Recommended Distance From Wall [cm]: 20 - 120
- Max. Power Consumption [W]: 325
- Standby Power Consumption [W]: 1.2
- Dimensions With Base (HxWxD) [mm]: 353 x 195 x 335
- Weight [kg]: 8.4
- Input Sensitivity [mV]: 1,400
- Input Impedance RCA [Ω]: 5k
- Input Mains Voltage [Volts]: Universal mains 100 - 240V
Product Description
Dali Rubicon 2-C active speakers (supplied with the Dali Sound Hub with BluOS) takes influence from both the prior Callitso active range and the passive Rubicon 2. With a Class D 250 watt amplifiers per speaker, the Rubicon 2-C packs enough punch to fill the room, and has exceptional wireless connection using their own proprietary network.
Wireless Connection
Rubicon 2-C has been designed with simplicity in mind. Supplied as a wireless speaker system, the need for complicated add on devices and electronics is eliminated. Set-up is made easy with these speakers as the wireless connection works as long as the power is working optimally. The Rubicon 2C and the Hub can even connected without an active WiFi signal because they two units are directly connected.
SMC Based Woofer
The 6.5 inch wood fibre Soft Magnetic Compound (SMC) based woofer handles the mid-range and bass fed directly by one of the 250 watt amplifiers. An SMC pole makes up the SMC magnet system which reduces distortion. On top of this, the wood fibre membrane and low loss design of the woofer ensures the cleanest amplifier signal and delivery of dynamic musical details.
Soft Dome Tweeter
Adopting the same technologies as Dali's high-end series, the Rubicon 2-C employs an ultra-lightweight soft dome tweeter. Unlike the hybrid tweeter, in this speaker the soft dome tweeter works alone at reaching the highest frequencies. It is housed in a low loss rubber surround within an aluminium chassis for optimal airflow around the cone and magnet system.
Compact Dimensions
The Rubicon 2-C Active Speaker can be stand mounted and is the smaller sibling to the 6-C. It surpasses its compact dimensions by delivering details rich in definition and a deep bass response. Part of the appeal of these speakers is that they pack a massive performance with a small footprint so they can be easily integrated in to any listening room.
Cabinet Design
The Rubicon 2-C utilises lightweight wood fibre cones housed in a rigid cabinet. The speaker is available in three colour finishes; high gloss white, high gloss black and walnut. On the front is a LED volume control strip that indicates the volume level, and on the rear you can find an LED display panel.
