Features
| Shape | Round |
|---|---|
| Warranty length | 2 Years |
| Brand | Pro-Ject |
Tech Specs
Pre-Fitted Cartridge: Ortofon 2M Red
Nominal Speeds: 33 / 45 RPM
Motor Completely Decoupled: Yes
RCA Phono Sockets: Yes
S-Shaped Tonearm: Yes
Effective Tonearm Length: 10"
Effective Tonearm Mass: 15g
Overhang: 16mm
Tracking Force: 0 - 25mN
Speed Drift: ± 0.14%
Wow & Flutter: ± 0.19%
Signal to Noise: -71dB
Platter Weight / Diameter: 1.6kg/ 300mm
Power Outboard PSU 110-240V, 50Hz
Output Voltage: 15V / 500mA DC
Power Consumption: 5W/ <0.5W Standby
Dimensions (WHD): 447 x 118 x 373mm
Weight: 5.5 kg
Product Description
The Pro-Ject RPM 3 Carbon continues the lineage of high-quality turntables from Pro-Ject. Based on the design of the RPM 1 Carbon, the RPM 3 features a 10" S-shaped carbon fibre tonearm, Ortofon 2M Red cartridge and more improvements.
Better Materials
The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The carbon touch sets the Pro-Ject RPM1 apart from the Pro-Ject Genie, and demonstrates the model range maturing over time. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, whilst minimising weight. The arm is finished with a pre-fitted Ortofon 2m Red Cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.
Smoother Bearing
The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.
We were mighty fond of the original Pro-Ject Genie 3, but with the updated design and the carbon fibre features, it's easy to fall for the Pro-Ject RPM1 Carbon.
Key Features
- Precision belt drive using synchronous motor
- Ultra-precision DC-driven AC generator motor power
- Inverted platter bearing with ceramic ball
- Platter made from MDF using felt mat
- 8,6” S-shaped carbon, aluminium & resin tonearm
- Special heat and pressure treatments to tonearm
- Magnetic anti-skating, counterweight with TPE damping
- Pre-fitted Ortofon 2M Red cartridge
- Lid available as optional extra
